Monday, February 29, 2016

PWS- How to Write a Quilt Pattern - Pattern Testing (Topic 8)

Topic VIII - Pattern Writing Blog Series - Pattern Testing


A.     Testing

At this point in the process, you have your quilt pattern drafted and you have reviewed, checked, and double-checked the math a few times.  Now it is time for test the pattern to make sure that it is understandable, correct, and easy to follow.

B.     Why Testing Is So Important

As a pattern designer, one of the scariest e-mails you can receive is about an error in your pattern.  With your mistake, you have caused a quilter to waste valuable time and fabric.  Testing is important to minimize pattern mistakes.

In addition to making sure your math and directions are correct, testers can help improve your pattern.  For example, in one of my charm square friendly patterns, a tester suggested adding fabric requirements to use fat quarters instead of charm packs for larger quilt sizes.  In another pattern, one of the testers said that it would be helpful to add yardages needed if someone wanted to make a background out of a single fabric instead of a scrappy version.  These were both great upgrades to my quilt pattern and made it more useful to buyers.

In previous comments, there were some questions on how to know whether the piecing instructions were too brief or too wordy.  Besides finding the right balance by simply practicing and practicing writing patterns, your pattern testers can give you valuable feedback on your instructions.

C.     Testing Your Own Patterns

Most of the time, I write out my entire quilt pattern and then I become the first tester by going through the quilt pattern as I make the quilt.  In rare cases, I make the quilt first and then write the pattern.  Typically, when I do this I will still be the first tester and will remake the quilt in a different size.  As you work through the pattern yourself, try to follow the instructions word for word, and take notes on the pattern as you go.

D.     Pattern Testers

Using pattern testers is totally optional, but I am definitely a proponent of using testers.  Testers will be able to tell you if any parts of your instructions are confusing and point out areas for improvement.  They will recheck your quilt math, correct your grammar, and help with conciseness, clarity, and layout.  Everyone reads and interprets directions differently and what makes total sense to you might be confusing to another quilter. 

If you are lucky enough to have a number of pattern testers, you should try to have them test a variety of quilt sizes.  If your pattern contains baby, lap, twin, queen, and king sizes, it would be more helpful to have a variety of sizes tested instead of 5 people testing the lap size.

a.      Types of Pattern Testers

There are two main types of pattern testers, one that will make a quilt (or quilt top) with your instructions and one who will review your pattern (text, math, etc.) without actually making a quilt.  Both are good and valuable testers.

b.     What Makes a Good Pattern Tester?

A good pattern tester will give you feedback on what to improve and not simply make quilt using the pattern and say that the pattern was “good”.  A quilt pattern is like any other written document, there is always room for improvement.

c.      Paying a Tester

This is a sensitive topic, doing a good testing job takes hours so should you pay your testers?  This is a question you are going to have to answer for yourself.  A majority of pattern designers do not pay pattern testers.

In addition to being a pattern designer, I am also a pattern tester for a number of quilters.  I personally have never expected any payment when I test patterns.  I truly enjoying testing quilt patterns (I am of the non-quilt making tester variety) and enjoy helping other pattern designers.  I have received gift cards and handmade items as thank you’s and love them, but do not expect them.

I do not pay my testers.  Instead, I offer to test their patterns, mentor new pattern designers, sponsor giveaways on their blogs, give copies of the finished pattern, make small gifts, send gift cards, etc.  I try to pay them back as much as I can as I understand the time and effort that they are spending to help me improve my pattern.

Yvonne at Quilting Jetgirl has an excellent post about her decision to pay pattern testers.  I encourage you to go to her post  for another perspective on pattern testing.

d.     Testing BFF

Everyone should have a TBFF (testing best friend forever).  Your TBFF will give you honest opinions without sugar coating and you will feel comfortable enough with them to e-mail/text/call throughout the entire pattern writing process.  My TBFF is Paige Alexander (who blogs over at Quilted Blooms).  In addition to being an awarding quilter, Paige is a financial book keeper for businesses (so great with math and organization) and as a bonus is local so we get to hang out.  I cannot count how many times I have texted or called Paige to get help with cover page layout or wording in a quilt pattern.  It is invaluable to have a resource to bounce ideas off of and get real-time feedback during the writing process.  Paige not only reviews my patterns, she has reviewed each of my posts for this series too! (Though I have kept adding and tweaking the posts after she reviewed them, probably adding all sorts of typos and bad grammar back in :)

e.     How to Find Pattern Testers

There are lots of quilters out in the world that would love to test your quilt patterns, but the big question is how to find them.  If you have a blog or are active on Instagram, you can put up a picture of the quilt and call for pattern testers.  You can also find testers at your local guild if you are a member of one.  (There will also be a new resource to find testers that will be announced on Thursday, hint hint).  

If you are able to find another pattern designer, you can test each other’s patterns (this also solves the issue of paying for pattern testing as the testing goes both ways).  There are also quilters who advertise on the internet to test your patterns for a fee. 

I find that you do not need 10+ people testing your pattern as the whole revision process and organizing the testing becomes overwhelming.  I typically use between 3 and 6 testers per pattern.

f.       Testing Expectations

You should communicate clear expectations to your pattern testers, so that everyone (the testers and yourself) know and agree to what is expected.  Here are some questions to consider so that both testers and designers have a good and useful interaction:
  • What is the time-frame for testing?
  • Are they to make a quilt block, quilt top, or finished quilt?
  • How would you like comments back (written, verbal, on the pattern, in a separate document?)
  • Are they allowed to show pictures of the progress and finished quilt or keep it secret?
  • Are you going to be compensating the testers?

g.     Sample Tester Questions

I send out a word document with the pattern to be tested asking specific questions to make sure that I am getting the feedback I hope for.  Below is a sample of the questions I ask:

1.    Have you found any errors in the pattern? (i.e. incorrect measurements, misspellings, miss-labeling, punctuation)
2.  Did any parts of the pattern seem too crowded or spaced apart? 
3.  Any illustrations or photographs too small or too large?
4.  If you printed the pattern, was everything in the printed copy easily legible?
5.  Were there any steps you had to read more than once or twice to understand what they were?  Were there any part of the pattern that could be helped with more explanation?
5.  Would instructions for using another size fabric (for example: yardage versus pre-cut be helpful)?
6.  Any other tips for improving the pattern?

Stay tuned, on Wednesday (March 2nd) we will have a round table discussion with the guest designers about their experiences with testing their patterns.

On Thursday (March 3rd) I will be announcing a super new resource that will help you with pattern writing, tester finding, and connecting with other pattern designers!



Sunday, February 28, 2016

To Sash or Not to Sash - Finished Charity Quilts

To sash or not to sash, that is the question :)

I finally finished the quilts made from the charity blocks from the Fabri-Quilt New Quilt Bloggers Blog Hop 2015 (just in time to announce the next hop, see below!).  I had 24 blocks so I figured that I would make two baby/toddler sized quilts.

I first had to decide how to combine the 12 blocks (each 12" square finished) into the quilts.  I had initially planned to add sashing but when I was arranging the blocks on my design wall floor, I really liked all of the blocks right next to each other.  Since I was making two quilts, I decided to make one with sashing and one without.  Here are the unsashed and sashed versions:


Which layout do you prefer?  I am still really torn, I really like the colorfulness of the nonsashed version and how the blocks interact with each other and I also really like how the sashing frames the blocks in the sashed version making each individual block stand out more.  Seeing them side by side if I had to pick I would go for the unsashed version.

I used my favorite go-to Aurifil color 2600 Dove for the quilting to blend well with all of the different colors.   I quilted the unsashed version with a simple meander and the sashed version using a few different quilting motifs (some were more successful than others).  Here were a few of my favorites:


Many thanks to the Fabri-Quilt New Blogger Block Hop bloggers who made such beautiful blocks to play with.  Here are the bloggers who contributed blocks (with links to the individual tutorials for the blocks):

Unsashed Quilt

Row 1: Lisa @Sunlight in Winter QuiltsYvonne @Quilting JetgirlWanda @Wanda’s Life Sampler
Row 2: Vicki @Orchid Owl QuiltsKim @Leland Ave StudiosSarah @Smiles Too Loudly
Row 3: Diana @Red Delicious LifeSharla @Thistle Thicket StudioWanda @Wanda’s Life Sampler
Row 4: Sarah @Smiles Too LoudlyLiz @LizzyClips DesignDenise @CrafTraditions


Sashed Quilt


Row 1:  Martha @Once a WingnutCheryl @Meadow Mist DesignsDina @Living Water Quilter
Row 2: Sandra @The Bias EdgeTerri Ann @Childlike FascinationHannah @Modern Magnolia Studio
Row 3: Diana @Red Delicious LifeMargo @Shadow Lane QuiltsJane @Jolly and Delilah Quilts
Row 4: Wanda @Wanda’s Life SamplerHelen @Midget Gem QuiltsCarrie @Chopping Block Quilts

You can find all of the blocks and their tutorials on Jayne from Twiggy and Opal's Pinterest board and you can find Yvonne's amazing charity quilts she made with her blocks here and here.

I will donate the two quilts through my local guild, the Foothills Piecemakers Quilt Guild.  Both quilts will go to the Serenity House which is a organization that provides women who are struggling with addiction and their children housing, food, and support.  Most of the women and children show up with little to nothing and truly appreciate the quilts.

Thanks to all of the quilters who contributed blocks for these charity quilts, they are going to make some kids very, very happy.

And now for some super fun news!  Paintbrush Studio (formerly Fabri-Quilt) is sponsoring another block hop with Yvonne from Quilting Jetgirl, Stephanie from Late Night Quilter, and myself hosting.  The hop will be happening March 28-30 with tons of new blocks and inspiration! (and yes, we will be hosting another New Blogger Hop this summer, stayed tuned for details)









Thursday, February 25, 2016

PWS - How to Write a Quilt Pattern - Guest Post by Amy of 13 Spools - Topic 7

Topic VII - Guest Designer Post - Amy

As part of the Pattern Writing Blog Series, our guest designers will be posting some in-depth discussions on some of the different topics.


Today, we will be visiting Amy from 13 Spools for a discussion on how she writes paper pieced patterns, including a video of her process!  Please hop over to her blog for the post and some information and tips.

We have now finished up our Topic VII on Illustrations and Text.  If you have missed any of previous posts in this topic or any of the earlier topics, they are all available in the Pattern Writing Series Tab above.


See you next week for Topic VIII, Pattern Testing!





Wednesday, February 24, 2016

PWS- How to Write a Quilt Pattern - Round table Topic 7 - Illustrations and Text




Topic VII - Illustrations and Text - Round Table Discussion






On Monday I covered Topic VII, the illustrations and text of the pattern.  I went through each section of the quilt pattern and discussed what each one typically held as well as how I wrote the sample pattern, Ninja Bears,

Tomorrow (Thursday, Feb 25th), Amy from 13 Spools will be posting on writing patterns for paper pieced designs including a video of how she makes her patterns!

In what order do you draft the pattern (do you start with the text, graphics, math, etc)?



Soma of Whims and Fancies
- My pattern drafting always starts with a drawing, which I then turn into a pattern and finally write the pattern file.

Yvonne of Quilting Jetgirl - I pretty much always start with the quilt math, then I make the graphics, and I fill in with writing the text along the way. Sitting down and writing the text is the hardest part for me, so if I break up the writing as I do the other steps it helps me maintain momentum. Breaking up the writing also allows me more time for editing / reviewing what I have written.

Also, I tend to do the quilt math first because it is fun. I do the graphics second because I find that if I can visually represent a step it is much easier for me to then describe the step in writing.

I want to echo what Anne and Christa point out about altering a pattern design. Sometimes cutting instructions end up with poorly utilized yardage, and for those designs I try to grow or shrink a block or design to work better.

Anne of Springleaf Studios
- Once the design is finalized, I do all the math and even tweak the design if it makes the yardage work better. I usually work out yardage and cutting simultaneously. The next step is usually a combination of illustrations and block directions. The final text, including the Design Lesson and Design Exploration text is the last thing I do. I agree with Yvonne that having the visuals is helpful for the writing.

Also it amazes me how many different ways you can describe something. Being consistent and concise are important. I think it's helpful to have a system not only for the whole process, but also to give yourself some writing guidelines in terms of format so you can be consistent from one pattern to the next.

When it comes to calculating yardage, I'm fine with the basic math part, but I am curious to know whether anyone factors in a little extra yardage for cutting mistakes and/or a percentage for shrinkage? I once read somewhere that the designer should assume a 40" WOF and include a 5% shrinkage rate. Does anyone do this? Another question; what do you do if you can get four pieces out of the WOF if it's actually 42" of useable width but not if you only assume 40"? Would you only count on getting three pieces and calculate more yardage or adjust the pattern to work with 40"? It gets messy when you start over thinking all these things which is what I tend to do.

Christa of Christa Quilts
- I start with the design and then make a lot of notes. I usually do a piece count for myself as a double check. I figure out the math that is needed first, such as how many squares I can cut from a strip of fabric, etc. If the math is weird, for example, if I need exactly 41” from a WOF strip of fabric, then I will try to alter the pattern so that pieces can be cut efficiently from 40” of fabric or less. Also, I try not to use non-standard finished sizes if that can be avoided.

Once the math makes sense, then I will write out the cutting instructions. From that, I will calculate how much yardage of each fabric is needed and create a materials list. Then I finish writing the text of the pattern with notes to myself such as “draw graphic of 4” finished half-square triangle” or “show exploded block diagram.”

Once the pattern text is completely written, I will draw the rough illustrations.

Then I make the quilt and do the photography. I only use photography for the cover picture and quilting details. All of the step-by-step instructions are done with illustrations. When the quilt is finished and the pattern parts are ready (photos, rough illustrations, text), I hand that off to the graphic designer to create the first pattern draft. We then go back and forth several times until I’m happy with the final layout and design, and I’ve double checked all the math and spelling.

Lorna of Sew Fresh Quilts
- Because my typical pattern is one that uses the Stitch and Flip method, once I have finalized the design, I usually start drafting the pattern by working on the graphics, breaking each block down into the pieces needed to construct the block.

From there I work out the instructions for the construction of the blocks. And then total how many pieces are needed for the blocks. Once I know how many pieces are needed, this leads to the cutting instructions. Then I use the cutting instructions to figure out how much yardage is required. If you look at how a pattern is laid out, writing the pattern is much like starting from the end and working your way back to the beginning.

Amy of 13 Spools - I draw out my pattern, then figure out the cutting directions. I write out the cutting directions by hand, and loosely write out the piecing directions by hand. If I know I’m going to write a pattern, I consciously consider myself the “first pattern tester” and write corrections & notes as I go. Then I just kind of do the rest all at once. Or whatever strikes my fancy at the moment.

Come back tomorrow for Amy's post about writing patterns for paper pieced designs including a video of how she makes her patterns!



Jelly Slice Quilt with the Fat Quarter Shop

I love Fat Quarter Shop's Shortcut Quilt patterns and am so excited to show you my version of their shortcut pattern called Jelly Slice!  I had so much fun making their Layers of Charm quilt last year, so when I got an e-mail earlier this year asking if I wanted to take part in the launch of a new Fat Quarter Shop pattern I did not hesitate in sending back a big "yes, please"!  



The Fat Quarter Shop's Jelly Slice pattern is completely free and, you can download the PDF pattern here and watch the video tutorial here.  The lap size (which I made) uses one jelly roll and some background yardage to make a nice 57.5 x 57.5" lap sized quilt.  The pattern includes instructions for baby, lap, twin, and queen sizes and is very easy and precut friendly.


I chose to make my version using a Hello Darling jelly roll from Bonnie and Camille (one of my favorite designers).  My first instinct was to pair the jelly roll with a white fabric background, but I thought that a light pink would actually stand out well against some of the lighter prints which are mostly white.  (I have paired Hello Darling with a navy blue in my Cake Slices quilt which also worked really well, you can see here). 




I love having the color cards of solid fabrics for most of the major manufacturers as it makes selecting a solid so much easier.  I found the perfect light pink, Bella Solids in Baby Pink by Moda Fabrics.

The quilt came together very quickly and soon it was time to quilt.  Using the rows of piecing as a guide (no marking, yippee), I quilted loops in each row (that sort of looked like an entire row of cursive l's).  The loops are a quick quilting pattern and give great texture to the quilt.  
I was so happy to find that I already had the exact Auriful thread match to the pink background, color 2410 in 50 wt. 

I used all of my machine binding practice from charity quilts to machine bind this quilt and I am very happy with the way it turned out. (I used the pink Auriful thread in the top and red Aurifil thread in the bobbin so that the stitching on the back of the binding would match well).  For the backing I used a piece of Lucy's Crab Shack by Sweetwater I have had forever.




This was a fun and easy quilt to make.  I really liked the pattern that emerges with the blocks come together.  Here are all of the links again:


Fabric: http://www.fatquartershop.com/moda-fabric/vintage-picnic-bonnie-and-camille-moda-fabrics/

And here are all of the bloggers taking part in the Jelly Slice launch party:

Taunja of Carried Away Quilting
Cheryl of Meadow Mist Designs  <-- that's me :)
Terri Ann of Childlike Fascination
Eileen of Eileen in Stitches
Cristy of Love You Sew
Hayley of Moobird Stitches
Shelley of The Carpenter's Daughter Who Quilts
Kathryn of Kathryn Jones Quilts

To celebrate the launch of this new pattern, the Fat Quarter Shop will be having a 15% off Jelly Roll sale starting on Monday 22nd and there is no coupon code necessary. (sale lasts until Sunday the 28th)


I am linking up to Let's Bee Social @ Sew Fresh Quilts, Needle and Thread Thursday @ My Quilt Infatuation, Whoop Whoop Friday @ Confessions of a Fabric AddictThank Goodness Its Finished FridayFinish It Up Friday @ Crazy Mom QuiltsFabric Frenzy Friday @ Fort Worth Fabrics Studio.




Monday, February 22, 2016

PWS - How to Write a Quilt Pattern - Topic 7 - Illustrations and Text



Part VII – Pattern Illustrations and Text

Today we are going to discuss the illustrations and text within a quilt pattern. I will be giving some guidelines and advice, but how you actually write the pattern and develop your voice and style will come with time and practice.

At the bottom of this post, after we go through all of the parts of Ninja Bears, you can download the entire pattern!

Illustrations

A. Illustrations versus Photographs

You can use illustrations, photographs, or a combination of both in patterns. It tends to be more common to have illustrations in patterns and photographs in tutorials. I am not completely sure why this is, it could be because people find photographs quicker and easier to take. I personally prefer to use illustrations in both patterns and tutorials for a variety of reasons.

Firstly, I am a night quilter which is not conducive to taking great, no flash, natural light pictures. Secondly, I sometimes change my mind on what I would like to show in the pattern, and if you are relying on photographs you might have to sew up another block just for a picture and take a lot of in-process photos. Thirdly, I find it more difficult to label a picture and have the labels be easily read. For all of these reasons, I prefer creating illustrations for my patterns. I am comfortable enough with Corel Draw that I can create all of my illustrations pretty quickly.

Photographs may be very handy for more difficult to draw steps, like showing curved piecing and 3D sewing steps (like handbags, clothes).

B. What Illustrations to Include?
1. Cutting
 – If there is a way of efficiently cutting the desired pieces out of a fabric cut you may wish to show it in an illustration. For example, my newest pattern Outlined Plus shows how to cut the pieces for one section of the block from a fabric scrap:


2. Block Piecing – This is where the majority of the illustrations will be, showing how all of the pieces within the block are assembled together. To figure out the piecing instructions and illustrations I start with the finished block (here is the finished block for the sample quilt pattern Ninja Bears):


I next “unstitch” the block one step at a time which for this block would be to separate the pieces into rows first.



I “unstitch” again to break the rows into their individual pieces.


Looking at the individual pieces for the block, there are 4 HST (half square triangles) in the block so I will include my standard illustrations for creating HST units (from my pattern piece library discussed here in Topic IV):


Obviously, the more complex the block (or larger number of different blocks), the more illustrations there will be in this section. I will also label some of the illustrations with the piece size and/or letter depending on the pieces and whether or not which piece is which is clear from the instructions.

Illustrations can include arrows showing which pieces are sewn to which pieces and also show pressing arrows or the actual folded seams to illustrate pressing directions if desired. Here is one example of an illustration from my On a “Jelly” Roll pattern showing the pressing directions of the seams:


3. Quilt Top Assembly – Patterns will usually contain one or more illustrations showing how the blocks go together into the quilt top. Very commonly, the illustration will show most of the quilt already pieced together with the second to top row spaced from the row below it and the top row broken into individual blocks. (The quilt top below is so simple I opted to just show one row unstitched.) Borders can be added to this illustration or may be shown in a separate illustration.


4. Optional Pictures – Some optional pictures include:
  • How the backing is pieced together
  • Color page of the quilt design
  • Picture illustrating a tip or bonus part of the pattern
  • Templates


Pattern Text

The pattern is typically broken up into 6 sections and I will be going into detail for each of these sections:
  • introduction / notes
  • material requirements
  • cutting
  • block assembly
  • quilt top assembly
  • finishing

A. Introduction / Notes

This section may be at the top of the first page of the pattern instructions and/or may be on the back cover of the quilt pattern (if it is in a printed format). I use this section to describe the pattern itself, where the block came from, different options within the pattern, etc. I also include any pattern notes here such as assumptions about the quilt pattern we discussed in the General Pattern Writing section, abbreviations, and assumed WOF.

Here is the introduction and notes section of Ninja Bears:


B. Material Requirements

We discussed all about the fabric requirements and how they were calculated in the Quilt Math topic in this series. This section can contain a listing of the material requirements or a chart with the information. Some of the information in the table is optional, for example, the batting size requirements are listed by some pattern designers and not included by others.

C. Cutting

All of the math and cutting calculated using the Quilt Math part of the Blog Series so now the cutting and piece numbers need to be placed into written form. Each pattern designer writes this section differently and uses slightly different terminology and language.

I typically write my cutting instructions by first stating the number of strips of a certain thickness x WOF need to be cut and then how to sub-cut the strips to the desired piece sizes for the pattern.

Optional (but really beneficial): It is very helpful to the pattern reader if you note where the pieces are going to go in the quilt top in the cutting section. This makes it easier for quilters switch out different fabrics for different areas of the quilt top. For example, in Ninja Bears, a quilter might want to have the background in the block one color but have the border a separate color. Instead of having to look through the piecing instructions to determine which fabric pieces are used where, the cutting instructions will clearly indicate their placement.

Ninja Bears’ cutting instructions read:
D. Block Assembly

The block assembly portion of the pattern contains the text (and supporting illustrations) to create the block(s) within the quilt top.

The first part of the block assembly portion of Ninja Bears is creating the HST. I was able to cut and paste my standard HST instructions (from my instructions pattern piece library in Topic IV) and just change the color in the illustrations and the numbers listed in the instructions.

Next, are instructions on how to sew all of the pieces of the block together. The block piecing instructions for Ninja Bears are short due to it being a relatively simple block.

I like to include a list of the different pieces that go into a quilt block; I have received feedback that this is helpful to quilters to organize their fabrics.

Make sure to note in the pattern any hints or tips. In Ninja Bears, it is very important to make sure that the HST’s in each star are facing the same direction.

It is very helpful for the quilter to give sizes of the intermediate pieced sections or units (where it makes sense) so that quilters know that there blocks are on the right track through the piecing of the block. (This is obviously more important for a more complicated block than Ninja Bears)

Whenever you list a size of a block, make sure you are clear whether it is the unfinished or finished size of the block to avoid any confusion.

Here are the block piecing instructions for Ninja Bears:

E. Quilt Top Assembly 

This is the section of the quilt pattern that explains how to piece the blocks together into the quilt top including whether the blocks need to be rotated relative to adjacent blocks, instructions for any sashing, and instructions for any borders.

How much detail to give in this section depends on the assumed knowledge of the quilter using the pattern. You might simply say to add the borders or might go into depth on how to measure the correct length for the borders and go into depth on how to attach them, this is just your personal style.

Here are the quilt top assembly instructions for Ninja Bears:
F. Finishing

I think that this section of the pattern is one of the most widely varied from pattern writer to pattern writer. Some patterns will go into great detail about how to form the backing, how to quilt the quilt, and/or how to bind the quilt. You will find other patterns that simply say to layer the quilt top, batting, backing and quilt as desired and then bind.

I think that my patterns fall in the middle of the road, I try to give all of the details related to the specific quilt, like how to form the backing and how to make the binding, but I do not include instructions that would be common for all quilt making like how to baste the quilt and how sew on the binding.

Here are Ninja Bears’ finishing instructions:

Ninja Bears – Pattern Now Available

Now that we have fully developed Ninja Bears as a pattern, I have uploaded it and made it available as a free downloadable pattern via Craftsy. Hop over to Craftsy right here and download the completed pattern.
Thanks for downloading Ninja Bears, if you use it to make a quilt, you can use the hashtag #NinjaBearsQuilt on social media. 

On Wednesday, the guest designers are going to be answering some questions about writing patterns and on Thursday, Amy from 13 Spools will be posting about writing paper pieced patterns.

Next week we will be focusing on pattern testing and will have a super announcement!



Friday, February 19, 2016

Foothills Charity Quilt Finish

As part of the Foothills Piecemakers Quilt Guild, we make philanthropy quilts with members making blocks, making quilt tops, and/or quilting the quilts for various charities.  I did not make this quilt top but offered to quilt and bind it. The quilt was made by Penny Jones using some fun Cotton & Steel.


Charity quilts are wonderful quilts to practice new quilting and binding techniques. It is a win for the quilter to practice a skill and a win for the guild to have some of the quilt tops finished into quilts. For this quilt, I quilted a spiral in the 4-block sections of the quilt and a meander in the long rectangular pieces.  It was quick and easy and just a little extra compared to a simple meander.  I also sewed the binding on completely by machine, it was great to practice this new-to-me skill.  


This quilt is now off to a good home through the guild's charity program.